iOS-刻度尺实现,画图的可怕!
FanDrage(iOS实现一个可以自由缩放,移动的刻度尺)
最近公司需要做一个画曲线的坐标轴,动画在坐标轴上运动,当然好多复杂的曲线改变曲率,运动画线,求三次贝塞尔曲线等复杂问题,本次不做探讨,本次只是来实现一个刻度尺的功能,支持缩放,左右移动。
drag.gif
我先把问题坑抛出来,怕你们看不到
- 1.空DrawRect方式为什么内存是50MB(不开启drawRect项目11M左右)
- 2.drawRect画图方式,缩放时为什么内存暴增,CPU暴增
- 3.换了Layer方式,缩放时内存恢复11M正常,但是CPU为什么还是暴增
- 4.每屏幕大概4秒,20倍左右的屏幕大小,用滚动控件,还是view
- 5.缩放时触发了layer隐式动画,可以关闭吗
- 6.用了view实现,怎样实现滑动惯性移动
一:需要的准备的技术要点,看似简单,踩坑无数
- 1.左右移动60秒,需要手势能处理,UIPanGestureRecognizer,
- 2.画图实现刻度尺,CAShapeLayer替代drawRect方法
- 3.时时缩放,使用手势UIPinchGestureRecognizer
- 4.每屏幕大概4秒,20倍左右的屏幕大小,用滚动控件,还是view
二:项目实现,一步步踩坑,以问题切入,后面会有完整代码
1.准备之前,创立一个FanProView来实现核心功能
//ViewController.m中创立一个可以画图的view(_proView)-(void)configUI{ //拖动区域view _redView = [[UIView alloc]init]; _redView.backgroundColor=[UIColor redColor]; [self.view addSubview:_redView]; [self.view fan_addConstraints:_redView edgeInsets:UIEdgeInsetsMake(34, 40, 34, 40) layoutType:FanLayoutAttributeAll viewSize:CGSizeZero]; _redView.clipsToBounds=YES;// [self.view layoutIfNeeded]; //画图绘制区域 _proView = [[FanProView alloc]initWithW:FanScreenWidth-80 h:FanScreenHeight-68];// _proView = [[FanProView alloc]initWithW:_redView.frame.size.width h:_redView.frame.size.height]; _proView.backgroundColor=[UIColor whiteColor]; [_redView addSubview:_proView]; //中间画一根红线标尺 [_redView.layer addSublayer:[FanDrawLayer fan_lineStartPoint:CGPointMake((FanScreenWidth-80)/2.0f, 0) toPoint:CGPointMake((FanScreenWidth-80)/2.0f, (FanScreenHeight-68)) lineWidth:2 lineColor:[UIColor redColor]]];}2.用View还是用ScrollView呢?
- 考虑这个的时候,想到后面还要画曲线什么的,view自由控制性更强,或者者ScrollView有什么特殊限制,最终选择View,用ScrollView应该也是可以的(不做过多解释)
- 想到拖动时的刻度移动,由于画20倍屏幕,用复用一个屏幕还是frame*20倍,由于刻度尺移动,给cell复用不太一样,而且线连接一起,不好控制时时拖动,时时绘制,局部渲染,还是用了view放大20倍,给ScrollView一样,滚动就行,后面会注意控制下子控件个数,避免
3.实现画图,DrawRect内存占用高,为什么?
- 1.因为我考虑了用View实现此功能,20倍屏幕,一开始怀疑绘制内容太多,或者者考虑绘制用了贝塞尔渲染,给上下文渲染不一样,结果我试了两种方法,看了说明,如同原理是一样的,没有太大差别,都是上下文渲染。
- 2.我试着减小view的frame大小,发现显著内存降低了,难道画图真的占用很大内存?
- 3.最后我注释了drawrect方法里面所有代码,内存还是很高,没有变化,只有注释掉drawrect方法,才恢复正常?
为什么会出现这样的情况呢,实现了UIView的-drawRect:或者者CALayerDelegate的-drawLayer:inContext:方法,为了支持对图层内容的任意绘制,Core Animation必需创立一个图层宽图层高4字节大小的寄宿图,宽高的单位均为像素。显著看到起因了,drawRect本身就是锅,而且缩放时,占用cpu和内存都是暴增,后面再说。
3.1DrawRect内存占用高,怎样处理呢?
- 1.由于CALayer的contents属性就对应于寄宿图,把View的layer层改成 CATiledLayer,结果显著不一样,具体效果你可以搜索,但是本项目改了后,效果不太好,下面有更好的处理方案
- 2.使用CAShapeLayer来实现画图的操作,内存瞬间恢复正常。
4.CALayer,CAShapeLayer画图,不用DrawRect,CPU为什么暴增
换用CAShapeLayer,有什么好处?
- 1.CAShapeLayer使用了硬件加速,绘制同一图形会比用Core Graphics快很多。
- 2.CAShapeLayer不需要像普通CALayer一样创立一个寄宿图形,所以无论有多大,都不会占用太多的内存
- 3.不会被图层边界剪裁掉。
- 4.不会出现像素化。
换用后,发现内存占用很低,但是CPU占用很高,发现我缩放时,重新移除创立了新的Layer,于是我就保留了layer,只是改变路径或者者改变frame,瞬间所有问题都处理了,而且很丝滑的感觉,但是发现,缩放时,frame动画恢复,不是时时的,触发了layer的隐式动画,
- CATransaction可以改变动画,begin,setAnimationDuration,commit等
- 关闭动画[CATransaction setDisableActions:YES];放在layer改变frame之前
都解决完,才发现内存,CPU占用都很少
5.自己View实现,怎样像ScrollView一样有滑动惯性呢?
- 1.UIPinchGestureRecognizer捏合手势有一个-velocityInView:方法,拿到x,y轴速度,可以自己控制好灵敏度,移动一段距离,控制下时间,实现一个动画[UIView animateWithDuration:]
- 2.假如感觉动画不够丝滑,可以用CADisplayLink屏幕刷新定时器,来实现,要考虑好动画先快后慢
6.其余注意点问题
- 1.假如用touchesBegan注意和UIPanGestureRecognizer,UIPinchGestureRecognizer手势冲突,尽量避免
- 2.注意捏合缩放时的倍数计算问题
- 3.注意计算移动最小刻度的问题
7.核心代码
7.1 FanProView.h
#import <UIKit/UIKit.h>NS_ASSUME_NONNULL_BEGIN@interface FanProView : UIView///中间缩放边距@property(nonatomic,assign)UIEdgeInsets scaleInsets;///必需这样初始化-(instancetype)initWithW:(CGFloat)w h:(CGFloat)h;///每次重新绘制-(void)fan_drawPro;@endNS_ASSUME_NONNULL_END7.2 FanProView.m
#import "FanProView.h"@interface FanProView()//初始化不会改变的距离@property(nonatomic,assign,readonly)CGFloat w;//可见区域宽度@property(nonatomic,assign,readonly)CGFloat h;//可见区域高度@property(nonatomic,assign,readonly)CGFloat l;//最小宽度 200ms//缩放移动时改动的属性@property(nonatomic,assign)CGFloat s;//缩放倍数(缩放接收后赋值)@property(nonatomic,assign)CGFloat current_scale;//当前时时缩放倍数@property(nonatomic,assign)CGFloat c;//当前的刻度位置偏移量默认0@property(nonatomic,assign)CGPoint touchPoint;//开始左右拖动时的初始点@property(nonatomic,assign)CGRect touchFrame;//开始左右拖动时的初始frame@property(nonatomic,assign)NSUInteger currentCount;//当前停留的最小刻度个数@property(nonatomic,assign)CGFloat scrollSpeed;//拖动时结束的速度///存放秒数的0-60s的缓存@property(nonatomic,strong)NSMutableArray<CATextLayer *> *textLayerArr;///字体的get方法@property(nonatomic,strong)NSMutableDictionary *attributedStrDic;///画刻度的layer@property(nonatomic,strong)CAShapeLayer *topLayer;@end@implementation FanProView-(void)awakeFromNib{ [super awakeFromNib]; [self initPro];}-(instancetype)initWithFrame:(CGRect)frame{ self=[super initWithFrame:frame]; if (self) { [self initPro]; } return self;}-(instancetype)initWithW:(CGFloat)w h:(CGFloat)h{ CGFloat min=(w-40.0f)/(4.0*5.0f); CGFloat cw=min*(60.0f*5.0f)+w; self=[super initWithFrame:CGRectMake(0, 0, cw, h)]; if (self) { _w=w; _h=h; _l=min; [self initPro]; } return self;}//初始化数据-(void)initPro{ self.s=1.0f; self.current_scale=1.0f; self.c=0.0f; self.scaleInsets=UIEdgeInsetsMake(0, _w/2.0f, 0, _w/2.0f); UIPanGestureRecognizer *pan=[[UIPanGestureRecognizer alloc]initWithTarget:self action:@selector(pan:)]; [self addGestureRecognizer:pan]; UIPinchGestureRecognizer *pinch=[[UIPinchGestureRecognizer alloc]initWithTarget:self action:@selector(pinch:)]; [self addGestureRecognizer:pinch]; _textLayerArr=[[NSMutableArray alloc]init]; [self fan_drawPro];}-(void)fan_drawPro{ //重新绘制(drawRect方法用这个打开)// [self setNeedsDisplay]; //layer绘制,节省了内存,CPU占用也维持在10%以下 [self fan_drawLayer];}#pragma mark - Layer绘制模式///Layer绘制方式 节省了内存,CPU占用也维持在10%以下-(void)fan_drawLayer{ NSLog(@"重新绘制"); //这样做耗费cpu,30%-40% 假如改变fram,10%左右 但是Layer会有隐式动画// [self.textLayerArr makeObjectsPerformSelector:@selector(removeFromSuperlayer)];// [self.textLayerArr removeAllObjects]; CGFloat rw=self.frame.size.width;// CGFloat rh=self.frame.size.height; int minute=60; //直接贝塞尔曲线渲染 UIBezierPath *path = [UIBezierPath bezierPath]; //绘制两个线 [path moveToPoint:CGPointMake(0, 1)]; [path addLineToPoint:CGPointMake(rw, 1)]; [path moveToPoint:CGPointMake(0, 9)]; [path addLineToPoint:CGPointMake(rw, 9)]; for (int i=0; i<minute*5; i++) { [path moveToPoint:CGPointMake(_w/2.0f+i*(_l*_current_scale), 1)]; [path addLineToPoint:CGPointMake(_w/2.0f+i*(_l*_current_scale), 5)]; } for (int i=0; i<minute+1; i++) { [path moveToPoint:CGPointMake(_w/2.0f+i*(_l*_current_scale)*5.0f, 1)]; [path addLineToPoint:CGPointMake(_w/2.0f+i*(_l*_current_scale)*5.0f, 9)]; } if (self.topLayer==nil) { CAShapeLayer *layer=[[CAShapeLayer alloc]init]; layer.lineWidth=2; layer.lineCap = kCALineCapRound; layer.strokeColor=[UIColor lightGrayColor].CGColor; layer.path=[path CGPath]; [self.layer addSublayer:layer]; self.topLayer=layer; }else{ self.topLayer.path=[path CGPath]; } //字体1s if (self.textLayerArr.count>0) { for (int i=0; i<self.textLayerArr.count; i++) { //关闭动画,Layer会有隐式动画,耗费CPU(不关闭,看到字体推迟,刷新不及时) [CATransaction setDisableActions:YES]; CATextLayer *layerText = self.textLayerArr[i]; // 显示位置 layerText.frame = CGRectMake(_w/2.0f+i*(_l*_current_scale)*5.0f, 0,20,10);// [self.layer addSublayer:layerText]; } }else{ for (int i=0; i<minute+1; i++) { NSString *second=[NSString stringWithFormat:@"%ds",i]; NSMutableAttributedString *attributedStr = [[NSMutableAttributedString alloc] initWithString:second attributes:self.attributedStrDic]; // 绘制文本的图层 CATextLayer *layerText = [[CATextLayer alloc] init]; layerText.string=attributedStr; layerText.alignmentMode=kCAAlignmentLeft; // layerText.foregroundColor = [UIColor darkTextColor].CGColor; layerText.backgroundColor = [UIColor orangeColor].CGColor; // 渲染分辨率-重要,否则显示模糊 layerText.contentsScale = [UIScreen mainScreen].scale; // 显示位置 layerText.frame = CGRectMake(_w/2.0f+i*(_l*_current_scale)*5.0f, 0,20,10); // layerText.position=CGPointMake(_w/2.0f+i*(_l*_current_scale)*5.0f, 0); // 增加到父图书 [self.layer addSublayer:layerText]; [self.textLayerArr addObject:layerText]; } } }-(NSMutableDictionary*)attributedStrDic{ if (_attributedStrDic==nil) { NSMutableParagraphStyle *textStyle = [[NSMutableParagraphStyle defaultParagraphStyle] mutableCopy]; textStyle.lineBreakMode = NSLineBreakByWordWrapping; textStyle.alignment = NSTextAlignmentLeft;//水平居中 NSMutableDictionary *dict = [NSMutableDictionary dictionary]; //字体大小 dict[NSFontAttributeName] = [UIFont systemFontOfSize:8]; //设置颜色 dict[NSForegroundColorAttributeName] = [UIColor darkTextColor]; dict[NSParagraphStyleAttributeName]=textStyle; _attributedStrDic=dict; } return _attributedStrDic;}#pragma mark - drawRect绘制模式/*// 绘制空的都会内存暴增,不建议用这个方法,cpu也会暴增到40%-70%- (void)drawRect:(CGRect)rect { //不开起任何绘制,只是单纯的开启方法,就有50M内存消耗,w*h*4字节// [super drawRect:rect];// return; NSLog(@"重新绘制"); CGFloat rw=rect.size.width;// CGFloat rh=rect.size.height; int minute=60; //上下文对象// CGContextRef ctx = UIGraphicsGetCurrentContext(); //直接贝塞尔曲线渲染 UIBezierPath *path = [UIBezierPath bezierPath]; //线宽 path.lineWidth = 2; //端点圆角 path.lineCapStyle = kCGLineCapRound; //绘制两个线 [path moveToPoint:CGPointMake(0, 1)]; [path addLineToPoint:CGPointMake(rw, 1)]; [path moveToPoint:CGPointMake(0, 9)]; [path addLineToPoint:CGPointMake(rw, 9)]; [[UIColor lightGrayColor]setStroke]; //[[UIColor grayColor]set];边框+填充颜色 for (int i=0; i<minute*5; i++) { [path moveToPoint:CGPointMake(_w/2.0f+i*(_l*_current_scale), 0)]; [path addLineToPoint:CGPointMake(_w/2.0f+i*(_l*_current_scale), 5)]; } for (int i=0; i<minute+1; i++) { [path moveToPoint:CGPointMake(_w/2.0f+i*(_l*_current_scale)*5.0f, 0)]; [path addLineToPoint:CGPointMake(_w/2.0f+i*(_l*_current_scale)*5.0f, 9)]; } //单独的绘制完成,要立即渲染 [path stroke];//渲染 //[path fill];渲染+填充 //字体1s for (int i=0; i<minute+1; i++) { NSString *second=[NSString stringWithFormat:@"%ds",i]; //自带渲染,不能放到[path stroke]之前,不然会重复渲染 [second drawAtPoint:CGPointMake(_w/2.0f+i*(_l*_current_scale)*5.0f, 0) withAttributes:self.attributedStrDic];// [second drawInRect:CGRectMake(_w/2.0f+i*(_l*_current_scale)*5.0f, 0,20,20) withAttributes:self.attributedStrDic]; }}+(Class)layerClass{ return [CATiledLayer class];}*/#pragma mark - 左右滚动手势解决//这个打开会给后面的捏合手势冲突,计算不好控制,故而弃用,改用拖动手势//-(void)touchesBegan:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event{// CGPoint touchPoint=[[touches anyObject]locationInView:self.superview];// [self fan_touchPoint:touchPoint touchType:0];//}//-(void)touchesMoved:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event{// CGPoint touchPoint=[[touches anyObject]locationInView:self.superview];// [self fan_touchPoint:touchPoint touchType:1];//}//-(void)touchesEnded:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event{// CGPoint touchPoint=[[touches anyObject]locationInView:self.superview];// [self fan_touchPoint:touchPoint touchType:2];//}//-(void)touchesCancelled:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event{// CGPoint touchPoint=[[touches anyObject]locationInView:self.superview];// [self fan_touchPoint:touchPoint touchType:3];//}-(void)pan:(UIPanGestureRecognizer *)pan{ CGPoint point = [pan locationInView:self.superview]; NSInteger touchType=0; if (pan.state==UIGestureRecognizerStateBegan) { touchType=0; }else if (pan.state==UIGestureRecognizerStateChanged) { touchType=1; }else if (pan.state==UIGestureRecognizerStateEnded) { touchType=2; }else if (pan.state==UIGestureRecognizerStateCancelled) { touchType=3; }else if (pan.state==UIGestureRecognizerStateFailed) { touchType=4; }// [self fan_touchPoint:point touchType:touchType]; if (touchType==2||touchType==3||touchType==4){ //计算惯性 CGPoint velocity=[pan velocityInView:self.superview]; //只要要x方向移动的速度就行 CGFloat x=velocity.x; self.scrollSpeed=x; }else{ } [self fan_touchPoint:point touchType:touchType];}///0-Began 1-Moved 2-Ended 3-Cancelled-(void)fan_touchPoint:(CGPoint)point touchType:(NSInteger)touchType{ if (point.x<0) { point.x=0; }else if(point.x>self.w){ point.x=self.w; } if (point.y<0) { point.y=0; }else if(point.y>self.h){ point.y=self.h; }// NSLog(@"====%f",point.x); if (touchType==0) { self.touchPoint=point; self.touchFrame=self.frame; }else if (touchType==1){ CGFloat d=point.x-self.touchPoint.x; CGRect frame=self.touchFrame; frame.origin.x+=d; if (frame.origin.x>=0.0f) { return; } if (frame.origin.x<=-(frame.size.width-_w)) { return; } self.frame=frame; }else if (touchType==2||touchType==3||touchType==4){ //用来解决拖动惯性实现,注释掉就是给原来一模一样 //自己试出来的比例,改动此处可修改灵敏度 float slideFactor =fabs(0.1 * (self.scrollSpeed / 200.0f)); CGPoint finalPoint = CGPointMake(point.x + (self.scrollSpeed * slideFactor),0);// NSLog(@"=%f====%f===%f===%f",slideFactor,self.scrollSpeed,point.x,finalPoint.x); point=finalPoint; CGFloat d=point.x-self.touchPoint.x; CGRect frame=self.touchFrame; frame.origin.x+=d; if (frame.origin.x>=0.0f) { frame.origin.x=0;// return; } if (frame.origin.x<=-(frame.size.width-_w)) { frame.origin.x=-(frame.size.width-_w);// return; } self.c=fabs(frame.origin.x); self.currentCount=[self centerOffsetX]; frame.origin.x=-(self.s*self.l)*(CGFloat)(self.currentCount); self.c=fabs(frame.origin.x);// self.frame=frame;// NSLog(@"左右移动偏移量:%f",self.c); [UIView animateWithDuration:slideFactor delay:0 options:UIViewAnimationOptionCurveEaseOut animations:^{ //slideFactor秒内做完改变动画,动画效果快进慢出(先快后慢) self.frame=frame; } completion:nil]; }}//获取当前需要多少个最小刻度-(NSUInteger)centerOffsetX{ NSUInteger i=self.c/(self.s*self.l); CGFloat cha=self.c-(CGFloat)(i)*(self.s*self.l); if (cha/(self.s*self.l)>=0.5) { i+=1; } return i;}#pragma mark - 捏合手势解决-(void)pinch:(UIPinchGestureRecognizer *)pinch{// NSLog(@"缩放倍数%f",pinch.scale); CGFloat scale = self.s*pinch.scale; if (scale>5.0f) { scale=5.0f; } if (scale<0.2f) { scale=0.2f; } if (pinch.state==UIGestureRecognizerStateBegan) { //开始的时候,趋近于1.0f// self.c=fabs(self.frame.origin.x)/self.s; }else if(pinch.state==UIGestureRecognizerStateChanged){ }else if(pinch.state==UIGestureRecognizerStateEnded||pinch.state==UIGestureRecognizerStateCancelled||pinch.state==UIGestureRecognizerStateFailed){ self.s=scale;// NSLog(@"==================%f",self.s); } CGFloat cl = self.l*scale; self.current_scale=scale; NSLog(@"真正的缩放倍数%f======%f=====%f",scale,cl,self.c*scale); CGFloat cw=cl*(60.0f*5.0f)+self.w; self.frame=CGRectMake(-(CGFloat)(self.currentCount)*(self.l*scale), 0, cw, self.h);// self.frame=CGRectMake(-self.c*scale, 0, cw, self.h); //缩放因子// self.contentScaleFactor=2.0f; [self fan_drawPro];}@end说明
1. 本站所有资源来源于用户上传和网络,如有侵权请邮件联系站长!
2. 分享目的仅供大家学习和交流,您必须在下载后24小时内删除!
3. 不得使用于非法商业用途,不得违反国家法律。否则后果自负!
4. 本站提供的源码、模板、插件等等其他资源,都不包含技术服务请大家谅解!
5. 如有链接无法下载、失效或广告,请联系管理员处理!
6. 本站资源售价只是摆设,本站源码仅提供给会员学习使用!
7. 如遇到加密压缩包,请使用360解压,如遇到无法解压的请联系管理员
开心源码网 » iOS-刻度尺实现,画图的可怕!
1. 本站所有资源来源于用户上传和网络,如有侵权请邮件联系站长!
2. 分享目的仅供大家学习和交流,您必须在下载后24小时内删除!
3. 不得使用于非法商业用途,不得违反国家法律。否则后果自负!
4. 本站提供的源码、模板、插件等等其他资源,都不包含技术服务请大家谅解!
5. 如有链接无法下载、失效或广告,请联系管理员处理!
6. 本站资源售价只是摆设,本站源码仅提供给会员学习使用!
7. 如遇到加密压缩包,请使用360解压,如遇到无法解压的请联系管理员
开心源码网 » iOS-刻度尺实现,画图的可怕!