Linux命令学习手册-objdump

作者 : 开心源码 本文共9532个字,预计阅读时间需要24分钟 发布时间: 2022-05-14 共364人阅读
objdump [选项] objfile...

功能

显示二进制文件信息

形容

objdump 用来显示一个或者者多个目标文件的信息。使用选项控制具体显示哪些信息。参数 objfile... 可以是静态库归档文件。

下面是少量常见的选项:

  • --archive-headers , -a : 显示档案库的成员信息,相似 ls -l 将 lib*.a 的信息列出。

  • -b bfdname , --target=bfdname : 指定目标码格式。

    这不是必需的, objdump 能自动识别许多格式,比方:

    $objdump -b oasys -m vax -h fu.o

    显示 fu.o 的头部摘要信息,明确指出该文件是 Vax 系统下用 Oasys 编译器生成的目标文件。 objdump -i 将给出这里可以指定的目标码格式列表。

  • -C , --demangle : 将底层的符号名解码成客户级名字,除了去掉所开头的下划线之外,还使得C++函数名以可了解的方式显示出来。

  • --debugging , -g : 显示调试信息。企图解析保存在文件中的调试信息并以C语言的语法显示出来。仅仅支持某些类型的调试信息。有些其余的格式被 readelf -w 支持。

  • -e , --debugging-tags : 相似 -g 选项,但是生成的信息是和 ctags 工具相兼容的格式。

  • --disassemble , -d : 从 objfile 中反汇编那些特定指令机器码的 section 。

  • -D , --disassemble-all : 与 -d 相似,但反汇编所有 section.

  • --prefix-addresses : 反汇编的时候,显示每一行的完整地址。这是一种比较老的反汇编格式。

  • -EB , -EL , --endian={big|little}: 指定目标文件的小端。这个项将影响反汇编出来的指令。在反汇编的文件没形容小端信息的时候用。例如 S-records 。

  • -f , --file-headers : 显示 objfile 中每个文件的整体头部摘要信息。

  • -h , --section-headers , --headers : 显示目标文件各个 section 的头部摘要信息。

  • -H , --help : 简短的帮助信息。

  • -i , --info : 显示对于 -b 或者者 -m 选项可用的架构和目标格式列表。

  • -j name , --section=name : 仅仅显示指定名称为 name 的 section 的信息

  • -l , --line-numbers : 用文件名和行号标注相应的目标代码,仅仅和 -d 、 -D 或者者 -r 一起使用使用 -ld 和使用 -d 的区别不是很大,在源码级调试的时候有用,要求编译时使用了 -g 之类的调试编译选项。

  • -m machine , --architecture=machine : 指定反汇编目标文件时使用的架构,当待反汇编文件本身没形容架构信息的时候(比方 S-records ),这个选项很有用。可以用 -i 选项列出这里能够指定的架构.

  • --reloc , -r : 显示文件的重定位入口。假如和 -d 或者者 -D 一起使用,重定位部分以反汇编后的格式显示出来。

  • --dynamic-reloc , -R : 显示文件的动态重定位入口,仅仅对于动态目标文件意义,比方某些共享库。

  • -s , --full-contents : 显示指定 section 的完整内容。默认所有的非空 section 都会被显示。

  • -S , --source : 尽可能反汇编出源代码,尤其当编译的时候指定了 -g 这种调试参数时,效果比较显著。隐含了 -d 参数。

  • --show-raw-insn : 反汇编的时候,显示每条汇编指令对应的机器码,如不指定 --prefix-addresses ,这将是缺省选项。

  • --no-show-raw-insn : 反汇编时,不显示汇编指令的机器码,如不指定 --prefix-addresses ,这将是缺省选项。

  • --start-address=address : 从指定地址开始显示数据,该选项影响 -d 、 -r 和 -s 选项的输出。

  • --stop-address=address : 显示数据直到指定地址为止,该项影响 -d 、 -r 和 -s 选项的输出。

  • -t , --syms : 显示文件的符号表入口。相似于 nm -s 提供的信息

  • -T , --dynamic-syms : 显示文件的动态符号表入口,仅仅对动态目标文件意义,比方某些共享库。它显示的信息相似于 nm -D|--dynamic 显示的信息。

  • -V , --version : 版本信息

  • --all-headers , -x : 显示所可用的头信息,包括符号表、重定位入口。 -x 等价于 -a -f -h -r -t 同时指定。

  • -z , --disassemble-zeroes : 一般反汇编输出将省略大块的零,该选项使得这些零块也被反汇编。

@file 可以将选项集中到一个文件中,而后使用这个 @file 选项载入。

举例

首先,在给出后面大部分测试所基于的源代码以及编译指令。

源代码如下:

[root@lv-k 04_libraryTest]# nl mytest.cpp      1  void printTest()      2  {      3          char a;      4          a = 'a';      5  }      6  void printTest2()      7  {      8          int a = 2;      9          a+=2;     10  }

对以上源代码进行编译,如下:

[root@lv-k 04_libraryTest]# g++ -c -g mytest.cpp

这里,生成的文件是 mytest.o ,为了方便测试包含了调试的信息,对可执行文件的测试,显示的结果相似。

查看当前使用的objdump的版本号

[root@lv-k 04_libraryTest]# objdump -V

输入之后输出如下:

GNU objdump 2.17.50.0.6-14.el5 20061020 Copyright 2005 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License.  This program has absolutely no warranty.

查看档案库文件中的信息

[root@lv-k 04_libraryTest]# objdump -a libmy2.a

输入之后输出如下:

In archive libmy2.a: myfile.o:     file format elf32-i386 rwxrwxrwx 0/0   2724 Nov 16 16:06 2009 myfile.o mytest.o:     file format elf32-i386 rw-r--r-- 0/0    727 Jul 13 15:32 2011 mytest.o

这里, libmy2.a 是一个使用 ar 命令将多个 *.o 目标文件打包而生成的静态库。命令的输出相似 ar -tv ,相比较 ar -tv 输出如下:

[root@lv-k 04_libraryTest]# ar -tv libmy2.a rwxrwxrwx 0/0   2724 Nov 16 16:06 2009 myfile.o rw-r--r-- 0/0    727 Jul 13 15:32 2011 mytest.o

显示可用的架构和目标结构列表

[root@lv-k 04_libraryTest]# objdump -i

输入之后输出如下:

BFD header file version 2.17.50.0.6-14.el5 20061020 elf32-i386 (header little endian, data little endian)   i386 a.out-i386-linux (header little endian, data little endian)   i386 efi-app-ia32 (header little endian, data little endian)   i386 elf64-x86-64 (header little endian, data little endian)   i386 elf64-little (header little endian, data little endian)   i386 elf64-big (header big endian, data big endian)   i386 elf32-little (header little endian, data little endian)   i386 elf32-big (header big endian, data big endian)   i386 srec (header endianness unknown, data endianness unknown)   i386 symbolsrec (header endianness unknown, data endianness unknown)   i386 tekhex (header endianness unknown, data endianness unknown)   i386 binary (header endianness unknown, data endianness unknown)   i386 ihex (header endianness unknown, data endianness unknown)   i386 trad-core (header endianness unknown, data endianness unknown)                elf32-i386 a.out-i386-linux efi-app-ia32 elf64-x86-64           i386 elf32-i386 a.out-i386-linux efi-app-ia32 elf64-x86-64                elf64-little elf64-big elf32-little elf32-big srec symbolsrec           i386 elf64-little elf64-big elf32-little elf32-big srec symbolsrec                tekhex binary ihex trad-core           i386 tekhex binary ihex ---------

这里,显示的信息是相对于 -b 或者者 -m 选项可用的架构和目标格式列表。

显示 mytest.o 文件中的 text 段的内容

[root@lv-k 04_libraryTest]# objdump --section=.text -s mytest.o

输入之后输出如下:

mytest.o:     file format elf32-i386 Contents of section .text: 0000 5589e583 ec10c645 ff61c9c3 5589e583  U......E.a..U... 0010 ec10c745 fc020000 008345fc 02c9c3    ...E......E....

这里注意,不能单独使用 -j 或者者 --section ,例如”objdump –section=.text mytest.o”是不会运行成功的。

反汇编 mytest.o 中的 text 段内容,并尽可能用源代码形式表示

[root@lv-k 04_libraryTest]# objdump -j .text -S mytest.o

输入之后输出如下:

mytest.o:     file format elf32-i386 Disassembly of section .text: 00000000 <_Z9printTestv>: void printTest()    0:   55                      push   %ebp    1:   89 e5                   mov    %esp,%ebp    3:   83 ec 10                sub    $0x10,%esp {         char a;         a = 'a';    6:   c6 45 ff 61             movb   $0x61,0xffffffff(%ebp) }    a:   c9                      leave     b:   c3                      ret    0000000c <_Z10printTest2v>: void printTest2()    c:   55                      push   %ebp    d:   89 e5                   mov    %esp,%ebp    f:   83 ec 10                sub    $0x10,%esp {         int a = 2;   12:   c7 45 fc 02 00 00 00    movl   $0x2,0xfffffffc(%ebp)         a+=2;   19:   83 45 fc 02             addl   $0x2,0xfffffffc(%ebp) }   1d:   c9                      leave    1e:   c3                      ret

这里注意,不能单独使用 -j 或者者 --section ,例如 objdump -j .text mytest.o 是不会运行成功的。另外 -S 命令对于包含调试信息的目标文件,显示的效果比较好,假如编译时没有指定 g++ 的 -g 选项,那么目标文件就不包含调试信息,那么显示效果就差多了。

反汇编出 mytest.o 的源代码

[root@lv-k 04_libraryTest]# objdump -S mytest.o

输入之后输出如下:

mytest.o:     file format elf32-i386 Disassembly of section .text: 00000000 <_Z9printTestv>: void printTest()    0:   55                      push   %ebp    1:   89 e5                   mov    %esp,%ebp    3:   83 ec 10                sub    $0x10,%esp {         char a;         a = 'a';    6:   c6 45 ff 61             movb   $0x61,0xffffffff(%ebp) }    a:   c9                      leave     b:   c3                      ret    0000000c <_Z10printTest2v>: void printTest2()    c:   55                      push   %ebp    d:   89 e5                   mov    %esp,%ebp    f:   83 ec 10                sub    $0x10,%esp {         int a = 2;   12:   c7 45 fc 02 00 00 00    movl   $0x2,0xfffffffc(%ebp)         a+=2;   19:   83 45 fc 02             addl   $0x2,0xfffffffc(%ebp) }   1d:   c9                      leave    1e:   c3                      ret

这里,尤其当编译的时候指定了 -g 这种调试参数时,反汇编的效果比较显著。隐含了 -d 参数。

显示文件的符号表入口

[root@lv-k 04_libraryTest]# objdump -t mytest.o

输入之后输出如下:

mytest.o:     file format elf32-i386 SYMBOL TABLE: 00000000 l    df *ABS*  00000000 mytest.cpp 00000000 l    d  .text  00000000 .text 00000000 l    d  .data  00000000 .data 00000000 l    d  .bss   00000000 .bss 00000000 l    d  .debug_abbrev  00000000 .debug_abbrev 00000000 l    d  .debug_info    00000000 .debug_info 00000000 l    d  .debug_line    00000000 .debug_line 00000000 l    d  .debug_frame   00000000 .debug_frame 00000000 l    d  .debug_loc     00000000 .debug_loc 00000000 l    d  .debug_pubnames        00000000 .debug_pubnames 00000000 l    d  .debug_aranges 00000000 .debug_aranges 00000000 l    d  .note.GNU-stack        00000000 .note.GNU-stack 00000000 l    d  .comment       00000000 .comment 00000000 g     F .text  0000000c _Z9printTestv 00000000         *UND*  00000000 __gxx_personality_v0 0000000c g     F .text  00000013 _Z10printTest2v

这里,输出的信息相似 nm -s 命令的输出,相比较之下, nm 命令的输出如下:

[root@lv-k 04_libraryTest]# nm -s mytest.o 0000000c T _Z10printTest2v 00000000 T _Z9printTestv          U __gxx_personality_v0

显示文件的符号表入口,将底层符号解码并表示成客户级别

[root@lv-k 04_libraryTest]# objdump -t -C mytest.o

输入之后输出如下:

mytest.o:     file format elf32-i386 SYMBOL TABLE: 00000000 l    df *ABS*  00000000 mytest.cpp 00000000 l    d  .text  00000000 .text 00000000 l    d  .data  00000000 .data 00000000 l    d  .bss   00000000 .bss 00000000 l    d  .debug_abbrev  00000000 .debug_abbrev 00000000 l    d  .debug_info    00000000 .debug_info 00000000 l    d  .debug_line    00000000 .debug_line 00000000 l    d  .debug_frame   00000000 .debug_frame 00000000 l    d  .debug_loc     00000000 .debug_loc 00000000 l    d  .debug_pubnames        00000000 .debug_pubnames 00000000 l    d  .debug_aranges 00000000 .debug_aranges 00000000 l    d  .note.GNU-stack        00000000 .note.GNU-stack 00000000 l    d  .comment       00000000 .comment 00000000 g     F .text  0000000c printTest() 00000000         *UND*  00000000 __gxx_personality_v0 0000000c g     F .text  00000013 printTest2()

这里,和没 -C 相比, printTest2 函数可读性添加了。

反汇编目标文件的特定机器码段

[root@lv-k 04_libraryTest]# objdump -d mytest.o

输入之后输出如下:

mytest.o:     file format elf32-i386 Disassembly of section .text: 00000000 <_Z9printTestv>:    0:   55                      push   %ebp    1:   89 e5                   mov    %esp,%ebp    3:   83 ec 10                sub    $0x10,%esp    6:   c6 45 ff 61             movb   $0x61,0xffffffff(%ebp)    a:   c9                      leave     b:   c3                      ret    0000000c <_Z10printTest2v>:    c:   55                      push   %ebp    d:   89 e5                   mov    %esp,%ebp    f:   83 ec 10                sub    $0x10,%esp   12:   c7 45 fc 02 00 00 00    movl   $0x2,0xfffffffc(%ebp)   19:   83 45 fc 02             addl   $0x2,0xfffffffc(%ebp)   1d:   c9                      leave    1e:   c3                      ret

这里,对 text 段的内容进行了反汇编。

反汇编特定段,并将汇编代码对应的文件名称和行号对应上

[root@lv-k 04_libraryTest]# objdump -d -l mytest.o

输入之后输出如下:

mytest.o:     file format elf32-i386 Disassembly of section .text: 00000000 <_Z9printTestv>: _Z9printTestv(): /root/test/04_libraryTest/mytest.cpp:1    0:   55                      push   %ebp    1:   89 e5                   mov    %esp,%ebp    3:   83 ec 10                sub    $0x10,%esp /root/test/04_libraryTest/mytest.cpp:4    6:   c6 45 ff 61             movb   $0x61,0xffffffff(%ebp) /root/test/04_libraryTest/mytest.cpp:5    a:   c9                      leave     b:   c3                      ret    0000000c <_Z10printTest2v>: _Z10printTest2v(): /root/test/04_libraryTest/mytest.cpp:6    c:   55                      push   %ebp    d:   89 e5                   mov    %esp,%ebp    f:   83 ec 10                sub    $0x10,%esp /root/test/04_libraryTest/mytest.cpp:8   12:   c7 45 fc 02 00 00 00    movl   $0x2,0xfffffffc(%ebp) /root/test/04_libraryTest/mytest.cpp:9   19:   83 45 fc 02             addl   $0x2,0xfffffffc(%ebp) /root/test/04_libraryTest/mytest.cpp:10   1d:   c9                      leave    1e:   c3                      ret

这里,项 -d 从 objfile 中反汇编那些特定指令机器码的 section ,而使用 -l 指定用文件名和行号标注相应的目标代码,仅仅和 -d 、 -D 或者者 -r 一起使用,使用 -ld 和使用 -d 的区别不是很大,在源码级调试的时候有用,要求编译时使用了 -g 之类的调试编译选项。

显示目标文件各个段的头部摘要信息

[root@lv-k 04_libraryTest]# objdump -h mytest.o

输入之后输出如下:

mytest.o:     file format elf32-i386 Sections: Idx Name          Size      VMA       LMA       File off  Algn   0 .text         0000001f  00000000  00000000  00000034  2**2                   CONTENTS, ALLOC, LOAD, READONLY, CODE   1 .data         00000000  00000000  00000000  00000054  2**2                   CONTENTS, ALLOC, LOAD, DATA   2 .bss          00000000  00000000  00000000  00000054  2**2                   ALLOC   3 .debug_abbrev 00000046  00000000  00000000  00000054  2**0                   CONTENTS, READONLY, DEBUGGING   4 .debug_info   000000ed  00000000  00000000  0000009a  2**0                   CONTENTS, RELOC, READONLY, DEBUGGING   5 .debug_line   0000003e  00000000  00000000  00000187  2**0                   CONTENTS, RELOC, READONLY, DEBUGGING   6 .debug_frame  00000044  00000000  00000000  000001c8  2**2                   CONTENTS, RELOC, READONLY, DEBUGGING   7 .debug_loc    00000058  00000000  00000000  0000020c  2**0                   CONTENTS, READONLY, DEBUGGING   8 .debug_pubnames 0000002f  00000000  00000000  00000264  2**0                   CONTENTS, RELOC, READONLY, DEBUGGING   9 .debug_aranges 00000020  00000000  00000000  00000293  2**0                   CONTENTS, RELOC, READONLY, DEBUGGING 10 .comment      0000002e  00000000  00000000  000002b3  2**0                   CONTENTS, READONLY 11 .note.GNU-stack 00000000  00000000  00000000  000002e1  2**0                   CONTENTS, READONLY

这里,更多的内容参见 man objdump 中的这个选项。

其它

更多的命令参见 man objdump

参考:

  • http://www.cnblogs.com/amethyst623/articles/1946499.html
  • http://blog.csdn.net/babylon_0049/article/details/4092978
说明
1. 本站所有资源来源于用户上传和网络,如有侵权请邮件联系站长!
2. 分享目的仅供大家学习和交流,您必须在下载后24小时内删除!
3. 不得使用于非法商业用途,不得违反国家法律。否则后果自负!
4. 本站提供的源码、模板、插件等等其他资源,都不包含技术服务请大家谅解!
5. 如有链接无法下载、失效或广告,请联系管理员处理!
6. 本站资源售价只是摆设,本站源码仅提供给会员学习使用!
7. 如遇到加密压缩包,请使用360解压,如遇到无法解压的请联系管理员
开心源码网 » Linux命令学习手册-objdump

发表回复